Proportions
| Cement | 1 part |
|---|---|
| Sand | 2 parts |
| Aggregate | 4 parts |
| Typical strength | 2,175 psi · 15 MPa |
Concrete mix
Concrete mix for a patio
A patio or path carries light loads, so a general-purpose M15 (1 : 2 : 4) mix at about 4 inches thick is plenty.
Recommended mix
1 : 2 : 4cement : sand : aggregate
M15 nominal concrete — about 2,175 psi (15 MPa).
Planning reference. Typical proportions and strength for general work, not a structural mix design. Load-bearing and structural work must follow your local building code and a qualified engineer's specification.
Why this mix
The classic 1:2:4 general-purpose mix. Fine for domestic paths, patios and non-structural slabs on well-prepared ground.
Once you know the mix, the volume calculators tell you how much of it to buy — cubic yards, cubic metres and the bag count in every size.
Nearby