Proportions
| Cement | 1 part |
|---|---|
| Sand | 1.5 parts |
| Aggregate | 3 parts |
| Typical strength | 2,900 psi · 20 MPa |
Concrete mix
Concrete mix for a garage floor
A garage floor carries vehicle loads, so it is poured at M20 (1 : 1.5 : 3), 5–6 inches thick, usually with reinforcement.
Recommended mix
1 : 1.5 : 3cement : sand : aggregate
M20 nominal concrete — about 2,900 psi (20 MPa).
Planning reference. Typical proportions and strength for general work, not a structural mix design. Load-bearing and structural work must follow your local building code and a qualified engineer's specification.
Why this mix
A workhorse structural nominal mix. Widely used for driveways, strip footings and lightly reinforced domestic slabs. Highest nominal mix commonly batched by volume.
Once you know the mix, the volume calculators tell you how much of it to buy — cubic yards, cubic metres and the bag count in every size.
Nearby