Proportions
| Portland cement | 1 part |
|---|---|
| Hydrated lime | 0.5 parts |
| Sand | 4.5 parts |
| Typical strength | 1,800 psi · 12.4 MPa |
Mortar
Mortar mix ratio for paving
Bedding flags and setts at grade uses a strong Type S mortar that resists weather and ground moisture.
Recommended mix
1 : 0.5 : 4.5portland cement : hydrated lime : sand
Type S mortar — about 1,800 psi (12.4 MPa).
Planning reference. Typical proportions and strength for general work, not a structural mix design. Load-bearing and structural work must follow your local building code and a qualified engineer's specification.
Why this mix
A strong, versatile mortar (min 1,800 psi) with good bond and workability. The usual choice for exterior walls at or below grade and for structural brick/block.
Once you know the mix, the volume calculators tell you how much of it to buy — cubic yards, cubic metres and the bag count in every size.
Nearby